6
DSX-1 Passthru Option Module
61200.055L1-1C
Chapter 2. Installation
INSTALLING THE OPTION MODULE
Power to the TSU 100/600 should be off when installing the
DSX-1 Module.
Placement of the Option M
odule
Figure 2-1 represents the action required for proper
placement of the option module.
1.
Remove cover plate from the TSU 100/600
rear
panel.
2.
Slide option module into the rear panel until it is
positioned firmly against the front of the TSU 100/600
.
3.
Fasten thumb-screws at both edges of option module.
Cover Plate
Option Module
TSU 100/600
Figure 2-1
Installing Option Module
Pow er Connection
Each DSX-1 module derives power from the base TSU
100/600 unit. Power to the TSU 100/600
is supplied by a
captive eight foot power cord.
