ADTRAN DSU IV ESP, User Manual

Page: 66 / 194

Chapter 6. Configuring Network Options
6-4 DSU IV ESP User Manual 61204011L1-1
equivalent AT commands that perform the same configuration
functions.
Network Address
A two-digit decimal address can be assigned to each DSU IV ESP.
This addressing capability makes it possible to perform remote
configuration and testing in point-to-point and multi-drop
networks. Figure 6-1 on page 6-2 shows the menu path used to
change the network address. The factory default setting is
0 .
Remote Configuration
This option sets up the DSU IV ESP to accept or reject remote
configuration commands. The factory default setting is
E
NABLED
.
Network Type
Select the appropriate network type. The choices are D
EDICATED
,
AT&T/MCI SW56 , and US S
PRINT
SW56 . The factory default
setting is D
EDICATED
.
Clock Source
The C
LOCK
S
OURCE
option specifies the timing source for the DSU
IV ESP’s internal circuitry. The factory default setting is F
ROM
N
ETWORK
.
When operating on a DDS network, the timing should be F
ROM
N
ETWORK
. On a point-to-point private network, one DSU IV ESP
must be set for M
ASTER
, the other set for F
ROM
N
ETWORK
.
When the DSU IV ESP is set to the Master Clock source, it will
default to its internal oscillators as the clock reference. To enable the
External DTE Port as the reference clock for the circuit, see Chapter
7, Configuring DTE Options on page 7-1 regarding the transmit clock
options.