Total Access 3000 DSLAM DS3 Primary Switch Module Installation and Maintenance Practice
94
61181041L3-5A
CSM Test Menu
The CSM Test menu (see
) is used to access submenus to perform DS3 loopback
tests and verify the integrity of the loop. The CSM Test menu is accessed by selecting DS3
Loopback Test from the Test menu. The graphic at the bottom of the screen displays active
loopbacks and changes based upon loopback selections. The Network side is to the left of the
DS3 Line Interface Unit (LIU). The box to the right of the DS3 Framer is representative of the
ATM engine. The Local side is to the right of the ATM engine.
Figure 49. CSM Test Menu
The CSM Test menu options are shown in
.
Table 56. CSM Test Menu Options
Option
Description
Function
1
DS3 Loopback
This option displays the
Shelf: 1 Slot: B Total Access System MM/DD/YY HH:MM
ONLINE
CSM Test
1. DS3 Loopback : No Loopback
Selection:
DS3 LIU DS3 FRAMER (ATM)
+----------+ +--------+ +----------+
|>>>>>>>>>>|>>>>|>>>>>>>>|>>>>|>>>>>>>>>>|
| | | | | |
|<<<<<<<<<<|<<<<|<<<<<<<<|<<<<|<<<<<<<<<<|
+----------+ +--------+ +----------+
'?' - System Help Screen
