12
Section 61245002L6-5, Issue 3
61245002L6-5C
Figure 12. Loopback Options, Dual Loop Screen
CIRCUIT ID: XXX 10/06/98 09:23:42
LOOPBACK OPTIONS
_____ _____ _____
|HTU-C| |HRE 1| |HTU-R|
| | LP1 | | LP1 | |
--->|-----|<============>|-----|<============>|-----|<---
| | | | | |
NET | | | | | | CUST
| | LP2 | | LP2 | |
<---|-----|<============>|-----|<============>|-----|--->
| | | | | |
|_____| |_____| |_____|
1) LOOPBACK TO NETWORK AT HTU-C = INACTIVE
2) LOOPBACK TO CUSTOMER AT HTU-C = INACTIVE
3) LOOPBACK TO NETWORK AT HTU-R = INACTIVE
4) LOOPBACK TO CUSTOMER AT HTU-R = INACTIVE
5) LOOPBACK TO NETWORK AT HRE-1 = INACTIVE
6) LOOPBACK TO CUSTOMER AT HRE-1 = INACTIVE
Press corresponding number to toggle loopback option.
Press “M” to return to the Main Menu
Figure 13. Provisioning Screen
CIRCUIT ID: EMUL 10/06/98 00:23:50
PROVISIONING
A. DSX-1/DS1 LINE CODE = B8ZS
B. DSX-1/DS1 FRAMING = AUTO
* NIU LOOPBACK = ENABLED
C. NEW ENGLAND 1:6 LPBK = ENABLED
D. LOOPBACK TIMEOUT = NONE
E. CUSTOMER LOSS RESPONSE = AIS
F. LATCHING LOOPBACK MODE = T1
* PRM MODE = SPRM
* DS1 TX LEVEL = 0 dB
G. SPAN POWER = ENABLED
H. SINGLE LOOP OPERATION = DISABLED
I. SINGLE LOOP AIS = ENABLED
* Option not configurable from this terminal
Press: Option letter - to change option setting
Enter - to implement and save current setting changes
“M” - to return to the main menu
