background image

Enterprise/Business Servers

 Trademarks

619500101-1A

Copyright © 2009 ADTRAN, Inc.

3

Trademarks

Any brand names and product names included in this manual are trademarks, registered trademarks, or 
trade names of their respective holders.

To the Holder of the Manual

The contents of this manual are current as of the date of publication. ADTRAN reserves the right to change 
the contents without prior notice.

In no event will ADTRAN be liable for any special, incidental, or consequential damages or for 
commercial losses even if ADTRAN has been advised thereof as a result of issue of this publication. 

Software Licensing Agreement

Each ADTRAN product contains a single license for ADTRAN supplied software. Pursuant to the 
Licensing Agreement, you may: (a) use the software on the purchased ADTRAN device only and (b) keep 
a copy of the software for backup purposes. This Agreement covers all software installed on the system, as 
well as any software available on the ADTRAN website. In addition, certain ADTRAN systems may 
contain additional conditions for obtaining software upgrades. 

Service and Warranty

For information on the service and warranty of ADTRAN products, visit the ADTRAN website at 

http://www.adtran.com/support

.

901 Explorer Boulevard

P.O. Box 140000

Huntsville, AL 35814-4000

Phone: (256) 963-8000

Copyright © 2009 ADTRAN, Inc.

All Rights Reserved.

Summary of Contents for Aastra 480i SIP






























Reviews: