Physical Description
NetVanta 100 Series Hardware Installation Guide
20
Copyright © 2010 ADTRAN, Inc.
61700412E1-34C
Reviewing the Rear Panel Design
shows the NetVanta 150 WAP rear panel. The unit accommodates a 12 VDC power supply.
Figure 2. NetVanta 150 Rear Panel Layout
Rear Panel Interfaces
10/100Base-T Ethernet Interface
The
ETH 0/1
port on the NetVanta 150 is an RJ-45 connector with PoE capability. See
for the Ethernet port pinouts. The Ethernet port provides the following:
•
10Base-T or 100Base-T with a single connector
•
Autonegotiation
•
CSMA/CD
•
IEEE 802.3 compatibility
•
Auto MDI/MDIX
Factory Default Switch
10/100Base-T Ethernet
PoE Port
Optional 12 V
Power Source
RP-SMA Antenna
Connectors
