ADTRAN 17003148F1, Hardware Installation Manual

Page: 11 / 23

NetVanta 3148/4148 Series Hardware Installation Guide Physical Description
617004148F1-34B Copyright © 2020 ADTRAN, Inc. 11
Figure 2. NetVanta 3148/4148 Front Panel Layout (PoE)
LED MODE Switch (PoE Models Only)
The LED MODE switch is located on the left side of the unit and is used to toggle ports 1
through 8 between individual port link status and PoE status display modes.
Status LEDs
The STAT LED indicates the unit’s status. The USB LED reflects the status of the USB
interface. The GIG 0/1 through GIG 0/4 LEDs reflect the status of the 10/100/1000Base-T
Ethernet interfaces, and the 1 though 8 LEDs reflect the status of the 10/100/1000Base-T
Ethernet switch interfaces. The PoE LED (available on NetVanta 3148/4148 PoE models
only) indicates that port LEDs 1 though 8 are displaying PoE status. See the
Table 1 on page
12
for LED behaviors.
CONSOLE Interface
The
CONSOLE
interface is an EIA-232 serial port (DCE) which provides for local
management and configuration (via an RJ-45 connector). See
Table A-3 on page 23
for the
CONSOLE interface pinouts.
8 Switch Port Interfaces
Ports 1 through 8 are RJ-45 connectors used to access the fully managed 10/100/1000Base-
T Ethernet switch.
USB Interface (Reserved for future use)
The USB port (
USB
) port is a USB 2.0 or 3.0 interface designed for communicating with the
unit and providing additional storage. The USB status LED is located below the STAT LED.
2 Routed 10/100/1000Base-T Combination Copper/SFP Ethernet Interfaces
The Gigabit Ethernet ports (
GIG 0/1
and
GIG 0/2
) consist of one RJ-45 and one SFP slot for
connectivity over copper or SFP connectors. (Use either the RJ-45 connector
or
the SFP slot.
The copper slot has precedence). See
Table A-1 on page 22
for the Ethernet interface
pinouts. The status LEDs are located above each interface.
2 Routed 10/100/1000Base-T Copper Ethernet Interfaces
The Gigabit Ethernet ports (
GIG 0/3
and
GIG 0/4
) consist of one RJ-45 connector for copper
connections. The status LED is located above the interface.
Status/PoE
LEDs
CONSOLE
Port
8 Switchport
Interfaces
USB Port
10/100/1000 Combination
Copper/SFP Ethernet Ports
10/100/1000 RJ-45
Copper Ethernet Ports
LED MODE
Switch