background image

C A U T I O N !

SUBJECT TO ELECTROSTATIC DAMAGE

OR DECREASE IN RELIABILITY

HANDLING PRECAUTIONS REQUIRED

Warranty:

ADTRAN will replace or repair this product within the warranty period if it does not 

meet its published specifications or fails while in service. Warranty information can be 

found online at 

www.adtran.com/warranty

.

Trademarks:

 Brand names and product names included in this document are trademarks, 

registered trademarks, or trade names of their respective holders.

Copyright © 2020 ADTRAN, Inc. All Rights Reserved.

ADTRAN CUSTOMER CARE:

From within the U.S.     1.888.423.8726 

From outside the U.S. +1 256.963.8716

PRICING AND AVAILABILITY 1.800.827.0807

*61287802F1-13F*

Documentation for ADTRAN Network Solutions products is available for 

viewing and download directly from the ADTRAN Support Community 

website. 
Go to: 

https://supportforums.adtran.com/welcome

Registration is required.
ADTRAN offers training courses on our products, including customized 

training and courses taught at our facilities or at customer sites.
For inquiries, go to:

 http://adtran.com/training

The following online documents and resources provide additional information for this product:
ADTRAN Pluggable Optics Compatibility Matrix 

(online tool, go to: 

http://www.adtran.com/pluggableoptics

)

GPON 452/454 Exterior Wall Mount ONT Compliance Notice

3. Go off-hook and observe that dial tone is heard.

g

     NOTE

Once a dial tone is heard by going off-hook during the Registration 
ID window, you have 10 seconds to enter the initial digits *00. Once 
*00 is entered, you have 300 seconds to complete the Registration 
ID process. 

4. After a dial tone is heard, enter 

*001234*XXXXXXXXXX*XXXXXXXXXX*, where 
XXXXXXXXXX is the Registration ID for this site.

g

     NOTE

Only digits 0-9 are supported.

5. If entered correctly, a confirmation tone is played and the 

number is displayed on the phone’s caller-id display with the 
string “ACCEPTED”.

6. If programming is successful, the ONT plays a stutter dial 

tone and flashes the GPON LED green for approximately 10 
seconds with a cadence of 300 milliseconds on/off before it 
continues its startup/ranging process.

g

     NOTE

If a failure occurs, the ONT plays reorder tone and displays 
**Invalid** on the caller-id display. If the pattern is entered 
incorrectly, the caller-id displays **Re-enter* if the first ID does 
not match the second.

Entering an invalid Registration ID, i.e., less than 10 digits or 
non-matching values, results in a reorder tone and you have the 
same 10-second window to restart ste

3

 to allow you to re-

enter codes that were entered incorrectly.

S

PECIFICATIONS

Electrical

Input Power Connection: UPS provided through 7-pin alarm 
connector

Voltage Range: 12 VDC nominal

Minimum Voltage: 10 V

Maximum Voltage: 16 V

Power Consumption: Less than 15 W

Optical

TX min power: 0.5 dBm

TX max power: 5.0 dBm

RSSI max sensitivity: –27.0 dBm

RX overload: –8.0 dBm

TX wavelength: 1310 nm typical

RX wavelength: 1490 nm typical

Physical

Height: 9.05 in. (23.0 cm)

Width: 8.66 in. (22.0 cm)

Depth: 1.38 in. (3.5 cm)

Weight: 3.5 lbs. (1.6 kg NID and ONT combined)

Environmental

Protected Equipment Environment (Outside)

Operational Temperature Range: –40°C to +71°C 

ambient with mechanical enclosure

Storage Temperature Range: –40°C to +85°C 

Relative Humidity: 5 to 85%

M

AINTENANCE

The Outdoor ONT does not require routine hardware maintenance 
for normal operation. ADTRAN does not recommend that repairs be 
attempted in the field. Repair services may be obtained by returning 
the defective unit to ADTRAN. Refer to the warranty for further 
information. Field support for software is provided through upgrade 
facilities.

S

AFETY

 

AND

 R

EGULATORY

Refer to the

 

Safety and Regulatory Notice for this product 

(P/N: 61287802F1-17) for detailed safety and regulatory 

information.
Consultez l'avis sur la sécurité et la conformité à la réglementation 
pour ce produit (61287802F1-17) pour obtenir des renseignements 
détaillés sur la sécurité et la réglementation.
Ausführliche Sicherheits- und regulatorische Informationen sind in 
der Konformitätserklärung zur Sicherheit und Einhaltung von 
Normen zu diesem Produkt (61287802F1-17) aufgeführt.

Summary of Contents for 1287802F1







Reviews: