Section 3 Engineering Guidelines
TRACER 4102/4202 System Manual
32
© 2004 ADTRAN, Inc.
612804202L1-1A
Antenna Interface (N-Type connector)
The
ANTENNA
interface (N-Type connector) connects to the customer-supplied antenna using standard
antenna feedline cable. When determining the cable specifications for your application, refer to Section 2,
Microwave Path Engineering Basics
on page 18) for a discussion on cable length and
loss factors.
5.
AT-A-GLANCE SPECIFICATIONS
The following is a list of specifications for the TRACER 4102/4202 system.
Table 9. At-A-Glance Specifications
Hardware
Description
Specification
Transmitter
Output Power
+20 dBm, max
Frequency Range
2400 to 2483.5 MHz (TRACER 4102)
5725 to 5850 MHz (TRACER 4202)
Receiver
Receive Level, Minimum
TRACER 4102
-96 dBm @ 2xT1, -98 dBm @ 1xT1
TRACER 4202
-93 dBm @ 2xT1, -95 dBm @ 1xT1
Receive Level, Maximum
-30 dBm
Receive Level, Nominal
-55 dBm
Frequency Plan
Plan A
Channel
Plan
1
Tx 2.416 GHz, Rx 2.456 GHz (TRACER 4102)
Tx 5.734 GHz, Rx 5.814 GHz (TRACER 4202)
2
Tx 2.422 GHz, Rx 2.462 GHz (TRACER 4102)
Tx 5.744 GHz, Rx 5.824 GHz (TRACER 4202)
3
Tx 2.428 GHz, Rx 2.468 GHz (TRACER 4102)
Tx 5.753 GHz, Rx 5.833 GHz (TRACER 4202)
Plan B
Channel
Plan
1
Tx 2.456 GHz, Rx 2.416 GHz (TRACER 4102)
Tx 5.814 GHz, Rx 5.734 GHz (TRACER 4202)
2
Tx 2.462 GHz, Rx 2.422 GHz (TRACER 4102)
Tx 5.824 GHz, Rx 5.744 GHz (TRACER 4202)
3
Tx 2.468 GHz, Rx 2.428 GHz (TRACER 4102)
Tx 5.833 GHz, Rx 5.753 GHz (TRACER 4202)
