![background image](http://html1.mh-extra.com/html/adtran/12804102l1a/12804102l1a_system-manual_3047731042.webp)
Section 5 User Interface Guide
TRACER 4102/4202 System Manual
42
© 2004 ADTRAN, Inc.
612804202L1-1A
1.
NAVIGATING THE TERMINAL MENU
The TRACER 4102/4202 menu system can be accessed with a VT100 compatible terminal that is
connected to the RS-232 port located on the back of the unit and set to 9600 bits per second, 8 data bits, 1
stop bit, and no parity. Flow control on the serial interface should be configured to
N
ONE
for proper
operation. Once a terminal is connected, press <
Ctrl + L
> to refresh the current screen. If password access
has been enabled, the
E
NTER
P
ASSWORD
message displays at the bottom of the TRACER 4102/4202
System Status menu.
Terminal Menu Window
The TRACER 4102/4202 uses a series of menu pages and a single main menu page to access its many
features. The main menu page (see Figure 1) provides a link to all available configuration/status pages.
Figure 1. Main Menu Screen
All TRACER 4102/4202 systems are shipped factory default with password protection
disabled.
After connecting a VT100 terminal to the TRACER 4102/4202, press <
Ctrl + L
> to redraw
the current screen.