ADTRAN 1202300L1, User Manual

Page: 27 / 54

Chapter 3. Operation
61202300L1-1 FXS+ Quad Voice Option Module User Manual 3-5
VIEW SIG BITS (View Signalling Bits)
Use VIEW SIG BITS to view the status of the RX and TX
signalling bits in the DS-1 stream. See Figure 3-4. If you
are operating in a SLC96 mode,
1/0
may be displayed.
This means that the signalling bit is toggling in each suc-
cessive frame for that port.
Figure 3-4. View Signalling Bits Display
SLC96 STATUS (Single and UVG Status)
SLC96 Status
is used to view the signalling states on a
per- channel basis related to the Channel (Network
Interface) and the Customer (2W Ports) . The states are
shown in lexical representation to aid in determining
system status without monitoring and translating the
signalling bits (
VIEW SIG BITS ). SLC96 STATUS is only
available when SINGLE or UVG modes of operation are
selected. See Figure 3-5.
Figure 3-5. SLC96 Status Display