manualshive.com logo in svg

ADTRAN 1200864L1, Hardware Installation Manual

Share
Download
ADTRAN 1200864L1 Hardware Installation Manual Download Page 65

NetVanta 3200/3300/3400 Series

 Unit Installation

61200860L1-34AE

Copyright © 2019 ADTRAN, Inc.

65

Powering the NetVanta 3200

The NetVanta 3200 comes equipped with a 12 VDC power supply for connecting to the proper power 
receptacles.

To insert the 12 VDC power connector, pull the outer sheath back from the metal connector.

Insert the connector into the receptacle (labeled 

POWER

) on the back of the unit keeping the sheath 

retracted until the connector is fully inserted into the receptacle.

Release the sheath so that it covers the metal connector. This ensures that the connector will not become 
disengaged during use.

 

Figure 33.  NetVanta 3200 Power Connector

• This unit shall be installed in accordance with Articles 300 and 400 of NEC NFPA 70.
• Maximum recommended ambient operating temperature is 50

o

C.

Instructions for Powering the

 

NetVanta 3200

Step

Action

1

2

3

Summary of Contents for 1200864L1






















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands