ADTRAN 1200831G1, Hardware Installation Manual

Page: 21 / 36

NetVanta 5305 Hardware Installation Guide Option Modules
61200990L1-34P Copyright © 2014 ADTRAN, Inc. 21
3. OPTION MODULES
The NetVanta 5305 family currently offers three option modules to meet networking requirements:
• NetVanta T3 Wide Module (P/N 1200832L1) on page 22
• NetVanta HSSI Wide Module (P/N 1200934L1) on page 23
• NetVanta Octal T1/E1 Wide Module (P/N 1202843E1) on page 24
The following pages describe each module, providing individual card specifications and features. Refer to
Appendix A on page 33 for pinout information. Refer to Installing Modules on page 28 for more installation
instructions.
NetVanta 5305 System Controller Module (P/N 1200831L1)
The NetVanta 5305 uses a central system controller module to provide configuration for the system using the
AOS. The NetVanta 5305 System Controller module (shown in
Figure 4 ) provides control interfaces for the
NetVanta 5305 system including a
C
ONSOLE
port (DB-9) and two Ethernet interfaces (RJ-48). See Table A-2
on page 33 for the C
ONSOLE
connector pinouts, and Table A-1 on page 33 for the Ethernet connector pinouts.
A system controller module is required for all NetVanta 5305 systems.
Figure 4. NetVanta 5305 System Controller Module
Features and Specifications
Interfaces
• Console: EIA-232 (DB-9 female) for access to CLI and monitoring
• Ethernet: Two 10/100Base-T interfaces (RJ-48) for connection to the LAN
Compliance
• EMC - see Electromagnetic Compatibility (EMC) Table on page 6 .
• UL/CUL 60950
• EN 60950
• IEC 60950
• AS/NZS 60950
Environmental
• Operating Temperature: 0°C to 50°C
• Storage Temperature: -20°C to 70°C
• Relative Humidity: Up to 95 percent, noncondensing
Physical
• Dimensions: 11.63-inch W x 8.63-inch D