ADTRAN 1200223L1, User Manual

Page: 34 / 44

Appendix A. Dial Plan Interface Configuration
A-2 T3 Module User Manual 61200223L1-1
T3 Module (Network Termination/RBS)
When you are working in the Network Termination section of the Dial Plan menu,
Slot is defined as a T3-1 or T3-2 Module, and Sig is set to RBS, the following inter-
face configuration options are available:
First DS0
Write security: 2; Read security: 5
Defines to the ATLAS 800 the DS0s used for this end point. These are the DS0s
which the ATLAS 800 uses to send and receive calls to and from the network
(PSTN). The outgoing calls which are allowed or restricted over these DS0s
are set by the Outgoing Call Accept and Reject Numbers discussed earlier.
Number of DS0s
Write security: 3; Read security: 5
Specifies the number of DS0s already defined for this end point. This field is
read-only.
DS0s Available
Read security: 5
Indicates which DS0s of the T1 have been defined in this switched end point
(indicated by "!"), in another switched end point (indicated by "s"), or in a
Dedicated Map (indicated by "n"). The following symbols may display in this
field:
Trunk Type (Voice/SW56)
Write security:3; Read security:5
Use this field if the incoming service on this trunk is Switched 56 digital
instead of standard voice.
Signaling Method
Write security: 3; Read security: 5
Defines to the ATLAS 800 the type of signaling to be used across this trunk.
The signaling selected needs to match the signaling being provided by the
network (PSTN). The following choices are available:
• E&M Immediate
• E&M Wink
• Loop Start
• Ground Start
digits
0-9 This DS0 is available. The digit that displays in this field represents
the last digit of the DS0 number.
* This port is requesting this DS0 for this connection, but the DS0 is
not yet activated.
! This DS0 is used by this end point.
s This DS0 is used elsewhere in the switched dial plan.
S This DS0 is in the switched dial plan and conflicts with this end
point.
n This DS0 is used in one or more dedicated maps.
N This DS0 is in one or more dedicated maps and conflicts with this
end point.