ADTRAN 1200221L1, User Manual

Page: 24 / 34

Chapter 3. Operation
3-10 VCOM Module User Manual 61200221L1-1
>
CONFIG
Provides diagnostic tools for suspected problems; under normal operation,
users do not configure the VoFR devices (see Figure 3-6).
Figure 3-6. VCOM Menus: Config
» Device
Read Security: 5
Identifies the VoFR device on the VCOM Module. VoFR devices are num-
bered 1
— 32.
» State
Write Security: 3; Read Security: 5
Controls the configuration state of the individual VoFR device. The
VCOM Module determines the initial configuration state of each device.
ATLAS uses this configuration information to determine which VoFR
devices are functional and may be used; which are defective and should not
be used; or which are not present on the module and should not be used.
Users who suspect an individual VoFR device of improper operation can
manually disable that device to prevent ATLAS from attempting to use it.
Table 3-5 defines the possible states.
Table 3-5. Possible Configuration States
State Meaning
Deferred
Devices which fail built-in testing are automatically marked as
Deferred, indicating that ATLAS declines to use the device.
Available
The device is properly functioning and can be used when
required. ATLAS automatically marks devices that pass built-in
testing as
Available.
Disabled Marking a device as Disabled prevents ATLAS from attempting
to use it. You can mark a device currently in use as disabled
without disturbing the connection, but the device will not be eligi-
ble for use in future calls until you re-mark it as
Available. You
might want to do this if you suspect that a particular device is
malfunctioning and do not want any calls routed to it.