ADTRAN 1200221L1, User Manual

Page: 19 / 34

Chapter 3. Operation
61200221L1-1 VCOM Module User Manual 3-5
>
STATE
Read Security: 5
Denotes the module as
Online or Offline . Even though a module is physi-
cally installed, it must be marked Online for it to be considered an available
resource.
Marking an installed module Offline may be useful during system trouble-
shooting. If you choose Offline , the module will not be in an alarm condi-
tion, but will display Offline .
>
STATUS
Read Security: 5
Displays status information on the VCOM Module. Table 3-2 lists the sta-
tus messages that might appear.
Only if
State
reads
Online
can the ATLAS use an installed module
for any data movement.
Table 3-2. Status Messages
Message Meaning Comments
Online The module is enabled and is
responding to the system con-
troller's status polls. This is the normal response of
the system.
No
Response
The module is enabled but it is
not responding to the system
controller's status polls. This response indicates a prob-
lem in the system. It also shows
if the module is not installed.
Empty
The system controller has nei-
ther detected any module in the
option slot, nor has a module
been manually enabled for this
slot.
Offline The module is installed but has
been manually changed to
Offline
by a user.
The module is still responding to
the system controller status
polls.
Offline / No
Response The module is installed but has
been manually changed to
Offline
by a user. The module
is not responding to the system
controller's status polls.
This response indicates a prob-
lem in the system. It also shows
when the module is not installed.
Not Ready The module is installed and per-
forming startup initialization. The initialization of the
VCOM Module should take less
than two minutes.