ADTRAN 1200218L1, User Manual

Page: 60 / 122

Chapter 4. Status
4-4 OSU 300 User Manual 61200663L1-1
DTE PORTS
The following status information is available for DTE Ports 1-4.
Interface Type
The interface type of the port is shown in this field (HSSI, V.35, or
Quad DSX-1).
Port Status
This field displays the current port status. Possible states are listed
in the following chart.
Bandwidth
Displays the amount of bandwidth allocated to this port. This field
does not apply to the Quad DSX-1 interface card.
DTE Leads
If a lead is active on the port, it displays in this field. The leads
differ according to the interface type. This field does not apply to
Condition Description
Inactive The port is installed, but idle. Activate a port through the
P
ORT
S
TATE
field of the
DTE P
ORT
C
ONFIGURATION
menu.
Active The port has been configured and is passing data.
Error An error condition such as loss of transmit clock has occurred.
In Test The unit is currently in test mode.
Waiting for DTE The port has been configured and is waiting for the DTE to issue the
appropriate handshaking signals. For the HSSI interface, the terminal
equipment available (TA) signal must be asserted by the DTE. For
V.35, DTR is required if the TR field is set to
I
DLE
W
HEN
O
FF
;
otherwise, DTR is ignored. The TR field is found in the
DTE P
ORT
C
ONFIGURATION
menu.