ADTRAN 1200218L1, User Manual

Page: 54 / 122

Chapter 3. Configuration
3-16 OSU 300 User Manual 61200663L1-1
Password
Set the password required at login (up to 32 characters). The default
password is adtran (all lower case).
Terminal Timeout
Set the amount of time the terminal or Telnet session can remain
inactive before requiring re-entry of the password for access. This
option can be disabled or set for
1
MINUTE
, 5
MINUTES
, 15
MINUTES
,
60
MINUTES
, or
ONE DAY
.
IP Security
Enable or disable the IP Security option. If enabled, the unit accepts
management commands and Telnet sessions from the IP addresses
entered into the
IP H
OSTS
fields.
IP Hosts
Enter up to sixteen management station IP addresses from which
the unit should accept management commands. These addresses
are only applicable if
IP S
ECURITY
is enabled.
Master Control Port
Enable or disable the M
ASTER
C
ONTROL
P
ORT
option. If enabled,
the unit may be accessed through the craft port.
Slave Control Port
Enable or disable the C
ONTROL
P
ORT
option. If enabled, the unit
may be accessed through the craft port.
Circuit ID
Enter a name to identify the unit for management purposes.