ADTRAN 1200186L2, User Manual

Page: 25 / 36

Chapter 3. Operation
61200186L2-1 Octal BRI/U Module User Manual 3-3
S
LT
Read security: 5
Displays the number of the available slots in the ATLAS chassis. Slot 0
refers to the ATLAS unit. This field is read-only.
T
YPE
Write security: 3; Read security: 5
Displays the type of module actually installed in the slot or the type of
module you plan to install in the slot. If an Octal BRI/U Module is installed,
the Type field automatically defaults to U-BRI (the Octal BRI/U Module).
You can use this field to preconfigure a system before actually installing
modules by simply specifying the module that you want to install in each
slot.
M
ENU
Displays additional status and configuration menus for the selected module.
(To access the submenus for this item, use the arrow keys to scroll to the
M
ENU
column for the module you want to edit, and press
Enter
.) For detailed infor-
mation on each submenu item, see the section Modules/Menu on page 3-4.
A
LARM Read security: 5
Displays an alarm condition on the Octal BRI/U Module. Press
Enter
in this
field to activate the menu.
T
EST Read security: 5
Displays test name if the Octal BRI/U Module is executing a test. Press
Enter
in this field to activate the menu.
S
TATE Displays module status as either O
NLINE
of O
FFLINE
. Even though a module
is physically installed, it must be marked as online for it to be considered an
available resource. This field allows an installed module to be marked as of-
fline, which may be useful in system troubleshooting. If you choose
O
FFLINE
,
the module will not be in alarm condition, but will display O
FFLINE
.
T
YPE
automatically displays the name of an installed module. If
you want to change this field to a different type of module, you
must set
T
YPE
to
E
MPTY
before selecting the other module.
Once a module is installed, S
TATE
must be set to O
NLINE
in order
for ATLAS to use the module for any data bandwidth.