ADTRAN 1200063L1, Manual

Page: 83 / 137

Chapter 7. Configuring DTE Options
61200063L1-20 DSU III TDM User Manual 7-5
Clear to Send (CS) Options
The CS O
PTIONS
menu is used to select one of two different control modes
for the CS lead. Figure 7-4 on page 7-5 shows the menu path used to access
the
CS O
PTIONS
menu. The factory default setting is F
OLLOWS
RS .
Forced On
The CS lead remains on and request to send (RS) is ignored as long as the
unit is synchronized and able to pass data.
Follows RS
The CS state matches the RS state. No data can be received from the DTE
device until RS is activated. The CS lead only follows RS when the unit is
able to pass data, for example, when the unit it on-line and properly syn-
chronized.
Figure 7-4. Selecting Clear to Send (CS) Options
1=NETWORK OPT.
1=DTE RATE
2=DATA FORMAT
3=TX CLOCK
1=LOCAL
4=CS OPTIONS 1=FORCED ON
3=CONFIG 2=DTE OPTIONS 2=FOLLOWS RS
2=REMOTE 5=CD OPTIONS
6=SR OPTIONS
3=TEST OPTIONS
4=DIAL OPTIONS
5=MANUAL COMMAND