9.0 SPECIFICATIONS
INPUT/OUTPUT
INPUT SIGNALS
a.
Voltage:
Sine or square wave 9 volt to 24 volt pulse.
Other ranges: consult factory
b.
Frequency Range:
DC to 100 KHz
c.
Contact:
Dry 2
mA@
24 VDC rating: specify
d.
Full Scale Count:
Up to 4096 pulses: specify
OUTPUT SIGNALS/OUTPUT DRIVE
AC Power
DC Power
a. 4-20 ma de
0-1000 ohms max.
b. 10-50 ma de
0-400 ohms max.
c. 0-1 ma de
0-20,000 ohms max.
d. 1-5 vdc
250 ohms Z out
0-900 ohms max.
0-350 ohms max.
0-18,000 ohms max.
250 ohms Z out
e. 0-1 O vdc
500 ohms Z out
Or zero based in the same ranges.
optional.
500 ohms Z out
Other voltage and currents
PERFORMANCE
a.
Calibrated Accuracy:
1 pulse or 0.1 % of range
b.
Linearity:
1 pulse!
c.
Repeatability:
1 pulse
d.
Temperature Stability:
± 0.01%/
°
F maximum,
± 0.004%/
°
F typical
e.
Load Effect:
±
0.01% zero to full load
f.
Output Ripple:
10 mv PIP maximum
g.
Temperature Range:
0
°
to 140
°
F (-18
°
to 60
°
C) operating
-40
°
to 185
°
F (-40
°
to 85
°
C) storage
Note: All accuracies are given as a percentage of span
MECHANICAL
a.
Electrical Classification:
general purpose
b.
Connection:
Barrier terminal strip
(3/8 in. spacing, No. 6 screws)
c.
Controls:
Multiturn Zero and Span Controls
d.
Mounting:
Standard Surface Mounting
Optional Configurations: See Housing Section
e.
Weight: New
Unit: 2.6 pounds (1.18 kilograms)
Shipping: 3.0 pounds (1.36 kilograms)
POWER
a. 115 vac:
±
10%, 50/60 Hz, 3 watts, 0.7 Pf (standard)
b. 24 vdc:
±
10% non-isolated, 3 watts (Option P1)
c. 24 vdc: ± 10% isolated, 3 watts (Option P2)
d. 48 vdc:
±
10% isolated, 3 watts (Option P3)
e. 125 vdc: Nominal (105-140 vdc) isolated, 3 watts (Option P4)
f. 230 vac:
±
10%, 50/60 Hz, 3 watts, 0.7 PF (Option PS)
10.0 OUTLINE & MOUNTING
______ 7.0in. -----
(178mm)
,,,,,,
,,
,,
,,,, ,,
,,,,,,
,, ,, ,,
,, ,, ,,
,, ,, ,,
,, ,, ,,
,, ,, ,,
r\c __ ::::::::;�,::::::::::
One 7/8 in. diameter hole for 1/2 in. conduit
(22.2mm)
0.234 in. diameter 2 places (clearance for 110 screw) 0.234 in. diameter 2 places (clearance for #10 screw)
(6mm)
(6mm)
-4-
Holes for up to
8 - Adjustment
Controls
4 Screws,
remove to
pull out
module�
8.50 �-
required
(216mm)
Allow 1.5"
(38mm)for
Holes for up to
8 - Adjustment
Controls
Second terminal
block-option
Allow 2.8"
(71mm)for
side by side
mounting without
front covers.
190-A-000023-0
