Adtech ADT-RC400 Page 73 User Manual Download

Page: 73 / 86

5. Digital Input and Output Interfaces

5.1 Digital Inputs

QC400 contains an extended wiring IO board, which is powered by an independent

external 24V power supply. It has 34 ordinary inputs and 27 ordinary outputs (6 relays are

included). Effective input level can be determined to high or low according to the level

configuration of common terminal.

5.1.1

Input Interface Definition and Pin Functions



INPUTCOM(input common terminal): an external 24V or 12V power supplied.



Digital input interface uses a 37-pin DB terminal and 20-pin socket, which contains the

power and common wiring ports.

Pins’ arrangement of digital input port is shown as following:

IN_0

IN_1

IN_2

IN_3

GND_24V

INPUTCOM

IN_4

IN_5

IN_6

IN_7

P 24V

IN_8

IN_9

IN_10

IN_11

IN_12

GND_24V

INPUTCOM

IN_13

IN_14

DI_15

IN_16

IN_17

P 24V

IN_18

IN_19

IN_20

IN_21

GND_24V

INPUTCOM

IN_22

IN_23

IN_24

IN_25

P 24V

IN_26

IN_27

Figure 5-1 Digital input ports

Note:

Input board contains three INPUTCOM ports. All input ports can be used if only one of

INPUTCOMs is supplied with 24V.

Summary of Contents for ADT-RC400























































































Search results

Summary of Contents for ADT-RC400

Reviews:

Related manuals for ADT-RC400

Brands by name

Popular brands

Adtech ADT-RC400, User Manual

Search results

Summary of Contents for ADT-RC400

Reviews:

Related manuals for ADT-RC400

Brands by name

Popular brands