background image

 

 

TEST SYSTEM WEEKLY  

NOTE: 

System must also be tested with AC power removed. 

 

REFER TO THE INSTALLATION INSTRUCTIONS FOR THE CONTROL WITH WHICH THIS DEVICE IS USED, FOR DETAILS 

REGARDING LIMITATIONS OF THE ENTIRE ALARM SYSTEM. 

 

RF EXPOSURE  

 

Warning – The antenna(s) used for this device must be installed to provide a separation distance of at least 7.8 inches (20 cm) from all persons and 

must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC and ISED multi-transmitter 

product procedures. 

 

 

APPROVAL LISTINGS / APPROBATIONS HOMOLOGATIONS 

UL 985:2015 Ed.6+R:12Jul2018 

UL 1023:2017 Ed.7 

UL 1610:2016 Ed.4 

UL 1637:2017 Ed.5 

UL 2017:2008 Ed.2 +R:17Jan2016 

ULC S304:2016 Ed.3 +R:10Oct2018 

ULC S545:2002 Ed.2 

ULC SUBJECT C1023:1974 Ed.1 

CSA C22.2#205:2017 Ed.3 

 

OTHER STANDARDS 

RoHS 

 

System shall be installed in accordance with CAN/ULC-S540, Residential Fire Warning Systems. 

System shall be installed in accordance with Chapter 29 of the National Fire Alarm and Signalling Code, ANSI/NFPA 72. 

System shall be installed in accordance with CSA C22.1

Canadian Electrical Code, Part I, Safety Standard for Electrical Installations; CAN/ULC 

S302, Standard for the Installation, Inspection and Testing of Intrusion Alarm Systems; and CAN/ULC S301, Standard for Signal Receiving Centre 

Intrusion Alarm Systems and Operations. 

 

 

FEDERAL COMMUNICATIONS COMMISSION (FCC) & INDUSTRY CANADA (IC) STATEMENTS 

The user shall not make any changes or modifications to the equipment unless authorized by the Installation Instructions or User's Manual. 

Unauthorized changes or modifications could void the user's authority to operate the equipment. 

CLASS B DIGITAL DEVICE STATEMENT 

This equipment has been tested and found to comply with the limits for a Class B digital device, as defined by FCC Rules Part 15.105. The Class B 

Digital Device statement can be viewed at: https://customer.resideo.com/en-US/support/residential/codes-and-

standards/FCC15105/Pages/default.aspx 

FCC / IC STATEMENT 

This device complies with Part 15 of the FCC Rules, and Industry Canada’s license-exempt RSSs. Operation is subject to the following two 

conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference 

that may cause undesired operation. 

Cet appareil est conforme à la partie 15 des règles de la FCC et exempt de licence RSS d’Industrie Canada. Son fonctionnement est soumis aux 

conditions suivantes: (1) Cet appareil ne doit pas causer d’interférences nuisibles. (2) Cet appareil doit accepter toute interférence reçue y compris 

les interférences causant une réception indésirable. 

 

 

Responsible Party / Issuer of Supplier’s Declaration of Conformity: Ademco Inc., a subsidiary of Resideo Technologies, Inc., 2 Corporate Center 

Drive., Melville, NY 11747, Ph: 516-577-2000

 

 

The product should not be disposed of with other household waste. Check for the nearest authorized collection centers or authorized recyclers. The 

correct disposal of end-of-life equipment will help prevent potential negative consequences for the environment and human health. 

Any attempt to reverse-engineer this device by decoding proprietary protocols, de-compiling firmware, or any similar actions is strictly prohibited. 

 

WARRANTY INFORMATION 

For the latest warranty information, please go to: 

www.security.honeywellhome.com/warranty  

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

ADT Security Services 

1501 Yamato Rd 

Boca Raton, FL 33431 

 

 

 

 

 

Ê800-24399-1A}Š 

800-24399-1A   4/20   Rev A

 

 

 

Summary of Contents for SiXRPTRA

Page 1: ...e than 500 ft line of site then install the controller in the middle with repeaters on either direction of the panel If Installation requires more than 3 floor Communication Install Controller on the middle Floor then install Repeater based on the steady Amber RSSI Signal Strength LED indication as described in LED table below NOTE Maximum number of the repeater allowed in a system is two The path...

Page 2: ...NG A NEW SiXRPTRA WITH AN EXISTING CONTROLLER AND SENSORS 1 Using the Compatibility Section above confirm the controller and sensors are at the correct revision level to support the SiXRPTRA 2 Enroll the SiXRPTRA by keeping near the controller until all three LED s are solid Green The SiXRPTRA should be enrolled as a peripheral from MobileTech 3 Walk the SiXRPTRA away from the controller in the di...

Page 3: ...or directly to the controller NOTE Make sure all doors windows are closed before entering Walk Test 24 HOUR ENROLLMENT DELETION AND DEFAULT If the device is enrolled in a controller different than the intended controller and you are unable to delete it from the unintended controller default the device to factory default setting 1 Open the cover and verify device is powered on 2 Press the tamper fo...

Page 4: ...hority to operate the equipment CLASS B DIGITAL DEVICE STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device as defined by FCC Rules Part 15 105 The Class B Digital Device statement can be viewed at https customer resideo com en US support residential codes and standards FCC15105 Pages default aspx FCC IC STATEMENT This device complies with Part ...

Reviews: