ADT Pulse OC810 User Manual Download Page 8

Page: 8 / 114

Rear - Network Camera

Figure 3: Rear Panel

Antenna

Attach the supplied antenna here. The antenna is adjustable; best
results are usually obtained with the antenna positioned vertically.

Power Input

Connect the supplied 12V power adapter here. Do not use other
power adapters; doing so may damage the camera.

Reset Button

This button is recessed; you need a pin or paper clip can be used to
depress it. It can be activated at any time the camera is in the
"ready" mode.

•

Reset to manufacturer default valued and reboot

. When

pressed and held over 10 seconds, the settings of Network
Camera will be set to their default values.

LAN port

Use a standard LAN cable to connect your Network Camera to a
10/100BaseT hub or switch.

Note:

•

Plugging in the LAN cable will disable the Wireless interface.
Only 1 interface can be active at any time.

•

The LAN cable should only be connected or disconnected when
the camera is powered OFF. Attaching or detaching the LAN
cable while the camera is powered on does NOT switch the
interface between wired and wireless.

Speaker

The built-in speaker is mounted on the back.

Summary of Contents for OC810



















































































































Search results

Summary of Contents for OC810

Reviews:

Brands by name

Popular brands

ADT Pulse OC810, User Manual

Search results

Summary of Contents for OC810

Reviews:

Brands by name

Popular brands