Installation Guide for the iHub-3000B-ADT, iHub-3001B-ADT
12
Note:
Depending on how the system is configured, this screen might not require you
to enter all of the information shown in this example.
To configure the site information:
1.
Enter the required information from your
Installer Reference Sheet
, and then click
Next
.
Note:
The Security Panel User Access Code must match the same access code in the
ADT Pulse portal. For example if the user access code is 1234 (not recommended), the ADT
Pulse setting must also be 1234 or remote control will not be possible.
The installer should inform the customer that if they ever change their keypad user code
they must also change the code in the ADT Pulse web portal.
A message informs you that the service is now active.
Note:
If the service is not successfully activated, please refer to the Pulse
Troubleshooting guide for help.
2.
Click
Go to Portal
.
The installer sign in page appears.
