Cloud Link Quick Installation Guide
3
Details
Refer to the figure on the previous page.
Service
LED
On
- Activated and communicating with the server.
Flashing
- Activated but unable to find the server.
Off
- Not activated yet.
Wi-Fi
LED
On
- Wi-Fi devices are connected to the Cloud Link.
Flashing
- WPS mode is active.
Off
- No Wi-Fi devices are connected to the Cloud
Link.
Z-Wave
LED
On
- Z-Wave devices are paired with the Cloud
Link.
Flashing
- Z-Wave device added or reset mode is
active.
Off
- No Z-Wave devices are paired with the Cloud
Link.
Power
LED
On
- Unit is powered on.
Flashing
– Unit is starting up or upgrading
firmware.
Off
- Unit is powered off.
Ethernet
Port
Use a RJ-45 Ethernet cable to connect the Cloud
Link to your router.
Ethernet
LEDs
On
- Ethernet connection established but the
connection is idle.
Flashing
- Data is being transmitted or received via
Ethernet connection.
Off
- Ethernet connection is not available.
Reset
Button
When pressed and held 15 seconds, the device
settings are set to their default values.
