ITC8113 / TabX®
16
© ads-tec Industrial IT GmbH • Heinrich-Hertz-Str. 1 • 72622 Nürtingen • Germany
3.1 Operating location
The device is optimised for use with applications in a service environment.
Make certain that the specified environmental conditions are maintained at all times. Use in
non-specified environments, i.e., on board ships, in explosive atmospheres or at extreme
elevations, is prohibited.
ATTENTION
The device may only be switched on after acclimatising to the ambient
temperature in order to avoid condensate accumulation. This also applies
if the device is exposed to extreme temperature fluctuations.
To avoid overheating in operation:
The device must not be exposed to direct radiation by sunlight or any other light source.
3.2 Damage due to improper use
Should the device have evident signs of damages caused, e.g., by improper operation or
storage conditions or due to improper use or handling, the device must be shut down
immediately. Ensure that it is secured against being started up accidentally.
3.3 Warranty / repairs
During the device warranty period, any repairs must only be performed by the manufacturer or
by service personnel that has been authorised by the manufacturer.
3.4 Intended use
The device is used for diagnostics, visualisation and control of a wide range of processes in a
service environment, among other places. The device is designed for indoor and outdoor
applications.
The device is only to be assembled, installed and operated within the permissible
specifications.
