MES9000 series
−
Instruction manual v1.1
23
© ads-tec Industrial IT GmbH • Heinrich-Hertz-Str. 1 • 72622 Nürtingen • Germany
4.4.2 Dimensions of the retainer
4.4.3 Attaching the grommets
1.) Route all of the required cable lines through the opening in the device, the cable grommet and the
retainer.
2.) When doing so, pay attention to
- the different hole diameters in the supplied grommets as specified in section 4.4.1,
- the
top/bottom
marking on the grommets,
- the correct alignment of the retainer and the grommets: the
protrusions
must sit in the
grooves
of
the device opening.
