PYRO A/V LINK 38
PYRO A/V LINK 39
Using DV Pass Through for Digital Camcorders
If you wish to connect your Digital Camcorder to the 4 Pin 1394 port on the front
of the PYRO A/V Link, you will need to make some additional settings to ensure
that you can control your camcorder via the Video Studio software. Device
control will include Start, Stop and Record functions on your digital camcorder.
Follow the steps below to properly
setup your Digital Camcorder for
1394 pass-through with PYRO A/V
Link.
1.) Click the tool icon to bring up the
“Settings and Commands” menu.
2.) Click – Select Device Control
3.) Select the camcorder driver;
Microsoft 1394 Device Control.
4.) Then select “options”
5.) Select your Digital Camcorder as
the active device.
6.) Click “OK” to close the dialog
boxes.
You now should now see your digital
camcorder listed in the Driver window
on the capture settings panel.
7.) Be sure your camcorder is turned
on an set to VCR/VTR mode.
8.) Press “Play” below the Preview
Window and your camcorder should
begin playing and video will begin
playing in the preview Window.
Summary of Contents for PYRO A/V Link
Page 2: ......
Page 65: ...PYRO A V LINK 63 Notes ...