background image

 

INSTALL GUIDE

2016 AUDI S4 PTS WITH KEYPORT AUTOMATIC

DOCUMENT NUMBER 

REVISION DATE 

FIRMWARE 

HARDWARE 

ACCESSORIES 

ATTENTION: TO COMPLETE THIS INSTALLATION SOME ACCESSORIES MAY BE
REQUIRED. VISIT OUR WEBSITE TO SEE ALL THE REQUIRED ACCESSORIES FOR
YOUR VEHICLE. 

TERMS OF USE

Automotive Data Solutions Inc. (“ADS”) products are strictly intended for installation by Certi

ed Technicians who are employed

by a registered business specialized in the installation of automotive aftermarket electronics products. Prior to beginning
installation of an ADS product in a vehicle, it is the Certi

ed Technician’s responsibility to review the most current Product Guide,

Install Guide and vehicle-speci

c notes available in Weblink®. ADS is not responsible for any damages whatsoever, including but

not limited to any consequential damages, incidental damages, damages for loss of time, loss of earnings, loss of pro

t,

commercial loss, loss of economic opportunity and the like that may or may not have resulted from the use, misuse, improper
installation or operation of its products. ADS reserves itself the right to suspend any Weblink® account without notice and
decline to offer technical support to non-Certi

ed Technicians, noncompliant Certi

ed Technicians or end users. 

U.S. Patent No. 8,856,780 CA 2759622 
Automotive Data Solutions Inc. © 2021 

www.idatalink.com

A558F12

20211223_151400

RSA-AUD2

CMVWXA0

Summary of Contents for idatastart CMVWXA0














Reviews: