EOS Extraoral Suction System, Instructions For Use and Installation
10
3. Insert the mouthpiece tube into
the mounting hole of the third joint.
Make sure the thumb screw is aligned
with the center pillar groove. Tighten
the screw.
6 Product Use
6.1 Warnings During Use
•Do not allow any person or object, to inadvertently make contact with the system during
operation.
•Avoid exposing the product to any source of light or heat, either before, during or after use.
•To avoid possible bumping or tilting, do not place objects on the cabinet base or near office
furniture.
•Never disassemble the joint cups before or during use. This could lead to possible accidents
or failure.
•Do not tilt the equipment. Otherwise it could lead to personnel injuries.
•If the equipment is found in a tilted state, do not move the equipment horizontally or
attempt to take hold of the equipment by its arms or suction hood.
•Remove the power cord from the wall receptacle before moving the equipment.