MICROPHONE CONNECTIONS
Microphone 1
Microphone 2
Microphone 1 uses a standard 1/4” mono Jack plug.
The input is unbalanced and has priority over all other inputs
Microphone 2 uses a standard 1/4” mono Jack plug.
The input is unbalanced and designed for low impedance microphones.
Auxiliary 1 & 2
AUX 1 and 2 use standard phono sockets. each imput has two sockets which when con-
nected to stereo equipment mix the left and right channels to obtain a Mono signal.
Pin........Signal
Sleeve.....Screen
Pin
Sleeve
Sleeve
Tip...........Signal
Sleeve......Screen
Tip
Booster Output
Constant Voltage Output
Low Impedance
100V
For use with loudspeakers designed for 100V line systems.
Connections are to the common and 100V treminal
+
+
+
+
Com
100V
NOT APPLICABLE
For use with loudspeakers designed for low impedance.
Connections are to Common and 4 or 16ohm terminals
+
+
+
+
Com
4 ohm 16 ohm
