6
Wire It Up
In this section you will connect audio and video cables to capture audio and video and
then send audio and video back to a TV or VCR for viewing or recording.
2
1
Connect your video source (VHS, DVD, Laser Disc Player, TV. etc.) to your USB Instant
DVD+MP3. Connect the 6 ft. A/V In cable to the 3 RCA jacks to your analog audio/video
source RCA Line Out.
2
The other end connects to the “RCA Video In” jack and “3.5 mm Audio In” jacks on the
rear of your Instant DVD+MP3.
Plug It In
In this section you will Connect USB Instant DVD+MP3 to your PC and Install Software
Drivers. Please read through this section first, then go back and follow these step by step
instructions to connect your USB Instant DVD+MP3 and install device drivers and software
applications:
1
Insert USB Instant DVD+MP3 CD
.
3
2
Once you see the Instant DVD+MP3 installation screen, plug the power cable into your
USB Instant DVD+MP3, then plug it into a power source.