7
4. Install Device Drivers and Application Software
Install Device Drivers
Windows will detect the device and install
the device drivers. Follow the “New
Hardware Wizard” to install the drivers. The
device drivers are located at the root of the
USB Instant DVD CD. Let Windows
Search for the appropriate drivers. Win-
dows will find the drivers on the Instant
DVD CD and load them for you. Follow the
instructions on the New Hardware Wizard
and click “Finish” once the drivers are
installed.
Install Application Software
The USB Instant DVD AutoRun installation
menu should be on the screen.
Follow these steps to install necessary
software applications:
1.) Click the “Install Drivers” button to install
the all necessary drivers install the USB
Instant DVD capture and export utility and
other software that is NECESSARY for
proper installation of the device.
a. Instant DVD Capture and Export
utility
b. PowerDVD 3.0
c. DirectX 8.0a
3.) Click Video Studio 5. The Video Studio 5
AutoRun screen will appear. Install Video
Studio 5 and all associated applications.
4.) Click MyDVD 3.0. This will install the
MyDVD 3.0 application.
Install all the other bundled software now or at a later
time by inserting the Instant DVD CD and selecting
the desired software application.]
Installation notes:
During the Instant DVD application installation we will
prompt you to enable “DMA” on your IDE hard drives.
We do this to optimize video capture. When DMA is
not enabled you will likely drop video frames resulting
in jerky video captures. We will also set your VGA
resolution to 1024 x 768. This is the optimal resolution
for viewing video at full resolution. DVD video is
captured at 704 x 480 (704 x 576) PAL. If your
resolution is not high enough you will not be able to
view the video at full resolution.
uvs5_1edited.p65
12/5/01, 10:47 AM
7