VMT8000 series
38
© ads-tec GmbH • Heinrich-Hertz-Str. 1 • 72622 Nürtingen
9 Drives
The storage medium is selected according to the customer requirements. The following options are
available for storage:
mSATA Flash
:
A flash with a storage capacity of at least 1GB is used.
Its capacity depends on the desired operating system and the additional programs to be installed.
Hard disk/SSD:
A 2.5" hard disk with at least 80 GB (SATA) capacity is used.
The device can alternatively be equipped with an SSD. Its capacity depends on the desired operating
system and the additional programs to be installed.
Pos : 35 /D atent ec hni k/Lauf wer ke/Exter ne Lauf werke/ Ext er ne Lauf wer ke für OPC 5112 / 5115 / 5117 / I PC 1100 / CPC / PLC / OTC / ITC / VMT-Serie @ 0\ mod_1158926656205_6. doc @ 563 @
External drives:
The device includes no drive for removable media (CD/floppy).
Instead, the system provides a USB interface, to which an external drive can be connected. In this case
you'd have to ensure that the used device is suitable for industrial environments.
ATTENTION
Connecting or disconnecting external drives
during operation is not admissible, since it cannot
be excluded that the drive might be in use while
connecting or disconnecting it. Data loss might
result in the event of non-compliance!
