Terminals VMT5017
© ads-tec GmbH • Raiffeisenstr.14 • 70771 Leinfelden-Echterdingen
27
6.6
24V
DC
POWER SUPPLY
The power supply voltage is supplied via a feed-through clamp including screw
connection (figure shows socket in the device).
Voltage tolerance
In the equipment version with a 24V DC ±20% power supply, a DC-DC converter is
integrated.
•
Input voltage: 24V DC ±20%.
Current consumption
The current consumption of the device at nominal consumption depends on the equipment
version of this device.
(heater, WLAN, etc.)
•
Switch-on current: 7 Amperes (for 2ms)
•
Standby input current: 0.1 Ampere
•
maximum input current using heater: 2.5 Amperes
•
Regular operation: 1.5 Amperes without heater
Note:
The typical power consumption of this device is indicated in the "Technical details"
chapter.
‚
Pos: 30 /Datentechnik/Schnittstellen/Netzwerkanschluss RJ45/Netzwerkanschluss RJ45 für OPC / IPC / CPC / PLC / OTC / ITC / VMT-Serie/LSI 5015 SEW @ 0\mod_1158924094127_681.doc @ 867 @
PIN NUMBER
SIGNAL NAME
1
24V DC
2
Ignition contact (24V)
3
0V DC
