Rabbids & Ladders Manual V2.0
Chapter 06
–
Service & repair
21 |
P a g e
Operator Settings keeps resetting
Operator Settings keeps resetting back to default values after powering off the breakers.
The Windows & SSD Device write cache needs to be disabled:
-Exit the game to Windows.
-Press on Start
-Right click on My Computer
-Choose Properties
-Click on Device Manager
-Expand Disk Drives
-Double click the SSD Hard Drive 60Gb or 120Gb Device (Not the USB drive if there is one)
-Go to Policies
-
Remove the check in front of “Enable Write caching on the device” as seen below, press OK
and then YES to reboot the computer.
If it doesn’t ask to reboot the co
mputer you need to do it
by pressing Start, Restart.
