ADOS GmbH
MWS 897
Page 3
3.
Equipment settings / Menu
3.1
Navigation through menu
To modify the basic factory settings, both keys must be hold pressed. The input code is necessary to
protect against unauthorised modification. To enter the code “897", the “SELECT” key must be
pressed to increment the digit. Pressing the “ENTER” key confirms the input and switches to the next
digit.
At the end of input the “ENTER” key must always be pressed for confirmation. With the “SELCT” key
you can browse through the menu without making any modification or you can select a menu item.
After selecting a menu item, press the “ENTER” key and you can change the value with the
“SELECT” key. After confirmation with “ENTER” the value will be saved in memory.
An incomplete modification instruction is not saved without pushing “ENTER”. If no further key is
pressed, after 90 seconds the system returns to normal measuring cycle. If a value was changed by
mistake, enter the menu again and rectify it.
3.2
Block Diagramm Menu
The menu has the following tree structure:
