Operation
CAUTION!
Do not use direct laser radiation on a sensor.
CAUTION!
Use the attenuators and beam splitters to decrease
of laser radiation.
1. Power supply of the IR camera is carried out through
stabilised AC/DC 110-240V/12V adaptor or 4XAA size
rechargeable batteries.
2. Unscrew 4 screws (1) of the battery compartment (2). Install
4 rechargeable LR6 (AA) type batteries.
3. To switch the IR camera ON turn the rotary switch (3).
4. Rotate lens (4) to get observed object in focus.
5. Use buttons (5) to adjust picture brightness.
6. IR camera has limited sensitivity in 1100-1700nm spectral
region. It is recommended to use cut-off IR filter and work in
dark room (try to eliminate external illumination). Use a
metallic surface for observation reflected radiation, as any
other material might absorb infrared radiation
7. Connect the AC/DC adaptor through plug (9) to charge the
batteries. The indicator (10) will start to blink when batteries
are charged. Charging time is up to 4 hours.
8. Plug in video cable in to a socket (11) for video recording.
www.ir-viewers.com
[email protected]
5
