4
ENGLISH
CONNECTING THE THROTTLE LINKAGE
16mm (5/8 in)
1.
hƐĞƚŚĞƉƌŽǀŝĚĞĚďĂůůͲůŝŶŬƚŽĂƩĂĐŚƚŚĞƚŚƌŽƩůĞ
2.
3.
4.
5.
6.
the pushrod where it meets this hole.
7. Using pliers, bend the pushrod so there is a 90° bend at the mark.
8. Using a pushrod keeper
͕ƐĞĐƵ
re the pushrod in the servo arm.
9.
10.
CONNECTING THE ELECTRONIC IGNITION
BASELINE NEEDLE SETTINGS
-
gine are 1.5 turns out for the high-speed
needle, and 1.75 turns out for the low-
speed needle.
seat gently— do not for
ĐĞƚŚĞŵ͕ƚŚŝƐĐ
ould
damage the needles or
Đ
arburetor body.
Open the needles the number of turns
listed above.
Low speed needle
High speed needle