27
MAINTENANCE
DRIVE CHAIN
Adjust drive chain before each use.
Before operating the vehicle, always inspect
the drive chain.
Never operate this vehicle with the drive chain
too loose or too tight as severe damage to the
drive components can occur.
Check the free play of drive chain and adjust if
necessary.
Check for damage or missing O-ring or rollers.
Do not brush chain.
Lubricate only with an approved O-ring chain
lubricant.
Adjustment
Loosen chain tensioner lock bolts for
adjustment.
Insert a screw drive to adjustment hole and
move up-down to change free play.
The deflection should be between 10 and 20
mm (3/8 and 3/4 in).
Tighten lock bolts after properly adjustment.
Shaft Drive
It
’s not need to make any adjustment of shaft
drive. However, check dust rubber on every
ride. If dust rubber broken, replace immediately.
to avoid seriously damage.
Chain Tensioner Lock Bolts
Adjustment Hole
Summary of Contents for ATV-320
Page 1: ...0 ATV 320 S U ATV 320SD S U OWNER S MANUAL V1 0 2014 03 01...
Page 40: ...39 SPEEDOMETER OPERATION INSTRUCTIONS...
Page 41: ...40...
Page 42: ...41...
