manualshive.com logo in svg

ADLINK Technology SP-AL, User Manual, Page: 65 / 111

Share
Download
ADLINK Technology SP-AL User Manual Download Page 65

Driver & Application Installation

 49

SP-AL

3

Driver & Application Installation

After installing the operating system, all related drivers must be
installed for the system to function properly. This section describes
the drivers needed for Windows operating systems and the
procedures to install them. For other OS support, please contact
ADLINK for further information.

Install drivers as follows.

1. Fully install Microsoft Windows OS before installing any

drivers. Most standard I/O device drivers have been
included in Microsoft Windows OS. For Windows 10 IoT
Enterprise users, please note that you need Administra-
tor privilege to install the drivers properly.

2. Install the chipset driver.

3. Install the graphics driver.

4. Install the Ethernet driver.

5. Install the USB 3.0 driver

6. Install the I/O driver.

7. Install the SEMA utility, WDT and DI/O drivers.

3.1

Installing the Chipset Driver

The chipset driver directs the operating system to configure the
Intel

®

 chipset components in order to ensure that the following

features function properly:

SATA Storage Support 

USB Support 

Identification of Intel

®

 Chipset Components in the Device 

Manager

Windows 10 IoT Enterprise must be fully installed and running on
the system before installing this software:

Summary of Contents for SP-AL
















































































































Reviews:

No comments