manualshive.com logo in svg

ADLINK Technology ReadyBoard 910, Reference Manual, Page: 22 / 64

Share
Download
ADLINK Technology ReadyBoard 910 Reference Manual Download Page 22

Chapter 2

Product Overview

16

Reference Manual

ReadyBoard 910

Thermal/Cooling Requirements

The ReadyBoard 910 is designed to operate at its maximum CPU speeds of 2.1GHz, and 2.5GHz and 
requires a thermal solution to cool the CPU, PCH, and voltage regulators. ADLINK offers two optional 

cooling solutions. (See 

Table 2-6

 for descriptions of cooling options.)         

Physical Specifications 

Table 2-7

 lists the physical dimensions of the board, and 

Figures 2-8

 and 

2-9

 show the dimensions of the I/O 

panel and top-side views of the board.

Table 2-7.   Weight and Footprint Dimensions

NOTE

The overall system design must keep the ICs within their operating temperature 
specifications.

Table 2-6.   ADLINKOptional Cooling Solutions

Cooling Solution

Description

Passive Heatsink 
(without fan)

Qualified to maintain optimal performance up to +70°C.

Active Heatsink
(with fan)

Qualified to maintain optimal performance up to +85°C. (

Note

: The 

2710QE CPU requires a fan and is qualified only for +70°C.)

Item

Dimension

NOTE

Overall height is measured from the 
upper board surface to the highest 
permanent component (USB connector, 
CN15) on the upper board surface. This 
measurement does not include the 
cooling solutions available for this 
board. The height of the active heatsink 
(with fan) is 1.13" (28.79mm) from the 
top surface of the board.

Weight

0.24kg. (0.52lbs.) 

Height (overall)

16.51mm (0.65") 

Width

115mm (4.5") 

Length

165mm (6.5") 

Thickness 1.57mm 

(0.062")

Summary of Contents for ReadyBoard 910

































































Reviews:

No comments