ADLINK Technology ReadyBoard 620, Reference Manual

Page: 16 / 50

Chapter 2 Product Overview
10 Reference Manual ReadyBoard 620
Figure 2-4. Connector Pin Identifications
J4 GPIO 10-pin, 2 mm (0.079") header for GPIO signals
J5 Serial B 20-pin, 2 mm (0.079") header for serial ports 3 & 4 (COM3 &
COM4)
J6A/B Serial A 9-pin dual connectors for serial ports 1 & 2 (COM1 & COM2,
DB9)
J7 Video (CRT VGA) 15-pin connector for output to a CRT monitor
J8 Video (LCD TTL) 50-pin, 1 mm (0.039") header 36-bit output for LCD flat panels
J9 Video (LCD LVDS) 30-pin, 2 mm (0.079") header for LVDS video display
J10 Ethernet 1 + LEDs 14-pin connector for 8-pin RJ45 and LEDs for Ethernet port 1
J11
A/B/C/D PC/104 104-pin, connector for ISA functions
J12 Ethernet 2 + LEDs 14-pin connector for 8-pin RJ45 and LEDs for Ethernet port 2
J13A/B USB 0 & 1 8-pin connector for two 4-pin interfaces provides USB0 and USB1
J14 Keyboard/Mouse 6-pin, PS/2 Keyboard/Mouse connector (dual output cable)
J15 Audio In/Out 16-pin, 2 mm (0.079") header for Line In L/R, Line Out L/R, Mic
In
J16 Utility 5-pin header for power and reset buttons and speaker
J17 USB 2 & 3 10-pin, 2 mm (0.079") header provides USB2 and USB3 output
J18 Floppy/Parallel Port 26-pin, 2 mm (0.079") header for floppy/parallel port interface
J19 IDE 44-pin, 2 mm (0.079") header for IDE interface
J20 SMBus 5-pin, 2 mm (0.079") SMBus header for external device
connection
J21 IrDA 5-pin header for infrared signals
J22
A/B/C/D PC/104-Plus 120-pin, 2 mm (0.079") connector for PCI bus
J23 Compact Flash
Socket (on back of the
board) 50-pin, 1.27 mm (0.050") socket accepts compact flash cards
(Type I or II)
NOTE The pinout tables in Chapter 3 of this manual identify pin sequence using the
following methods: A 20-pin header with two rows of pins, using odd/even
numbering, where pin 2 is directly across from pin 1, is noted as 20-pin, 2 rows, odd/
even (1, 2). Alternately, a 20-pin connector using consecutive numbering, where pin
11 is directly across from pin 1, is noted in this way: 20-pin, 2 rows, consecutive (1,
11). The second number in the parenthesis is always directly across from pin-1. See
Figure 2-4 .
Table 2-2. Connector Descriptions (Continued)
20-pin, two rows,
Consecutive, (1, 11)
Or
1
2
3
4
5
6
7
8
9
10 20
19
1 2 4
15 11 20
10 5 3
20-pin, two rows,
Odd/Even, (1, 2)