ADLINK Technology Q7-BT, Technical Reference

Page: 32 / 50

26 Interfaces
3.18 MIPI CSI Camera Connector Signals
Table 3-2 lists the pin signals of the CN3 connector, which provides 40 pins, 2 rows, consecutive
sequence with 0.02" (0.50mm) pitch.
NOTE: The gray table cells denote ground or power. The # symbol indicates the signal is Active
Low.
Table 3-2: MIPI CSI Camera Interface Signals (CN3)
Pin # Signal Pin # Signal
1 MCSI_CAM0PWR# 40 MCSI_CAM1PWR#
2 MCSI_CAM0RST# 39 MCSI_CAM1RST#
3 GND 38 GND
4 Not Connected 37 CN_I2C_CAM_CK
5 V1P8S 36 CN_I2C_CAM_DAT
6 Not Connected 35 Not Connected
7 MCSI1_CLK_P 34 MCSI2_CLK_P
8 MCSI1_CLK_N 33 MCSI2_CLK_N
9 GND 32 GND
10 MCSI1_D0_P 31 MCSI2_D0_P
11 MCSI1_D0_N 30 MCSI2_D0_N
12 GND 29 GND
13 MCSI1_D1_P 28 MCSI3_CLK_P
14 MCSI1_D1_N 27 MCSI3_CLK_N
15 GND 26 Not Connected
16 MCSI1_D2_P 25 Not Connected
17 MCSI1_D2_N 24 GND
18 GND 23 V3P3S
19 MCSI1_D3_P 22 GND
20 MCSI1_D3_N 21 V5P0A