ADLINK Technology Q7-BT, Technical Reference

Page: 17 / 50

Hardware 11
Q7-BT
Figure 2-2: Component Locations (Bottom Side)
2.2 Connectors, Switches, and LEDs
Table 2-2 describes the connectors, switches, and LEDs shown in Figure 2-3 and Figure 2-4.
Table 2-2: Module Connector Description
Connector#
Board
Access
Description
CN1 Bottom 40-pin, DB40 Front-Flip connector for debug card
(Molex, 502790-4091)
CN3 Top 40-pin, board-to-FPC connector for MIPI camera interface
(Hirose, DF23C-40DS-0.5V)
GF1 - Q7 Primary and
Secondary Top/
Bottom 230-pin, MXM edge connector for Memory, Video, and I/O
functions
LED1 Top Blue LED indicating system status activities for HW Reset,
SW Reset, Power Up, Power Down, Reset Button, and
Power Button
LED2 Top Green LED for Power On
P1
P1 P23 P229
U27 U24
U19 U20
U73
U9
U48
Q7-BT_Bot_Comp_b
Key:
U9
- GbE Controller
U19 - BIOS 0
U20 - BIOS 1
U24 - DDR3L SDRAM
U27 - DDR3L SDRAM
U48 - eMMC NAND
Flash
U73 - SSD NAND, SATA