ADLINK Technology Q7-AL, User Manual

Page: 76 / 95

66
BIOS Setup
7.4.4.5. Chipset > South Cluster Configuration > USB Configuration
Feature Options Description
XHCI Pre-Boot Driver Disabled
Enabled
Enable/Disable XHCI Pre-Boot Driver Support
XHCI Mode Disabled
Enabled
Once disable, XHCI controller would be function
disabled, none of the USB devices are detectable and
usable during boot and in OS. Do not disable it unless
for debug purpose.
USB Port Disable Override Disabled
Enabled
Selectively Enable/Disable the corresponding USB port
from reporting a Device Connection to the controller.
USB OTG Support Disabled
Enabled
Enable/Disable USB OTG Support
XHCI Disable Compliance Mode FALSE
TRUE
Options to disable/enable XHCI LINK Compliance Mode
7.4.4.6. Chipset > South Cluster Configuration > Miscellaneous
Feature Options Description
State After G3 S0 State
S5 State
Last State
Specify what state to go to when power is re-applied
after a power failure (G3 State).
S0 State: System will boot directly as soon as power
applied.
S5 State: System keeps in power-off state until power
button is pressed.
Wake on LAN Disabled
Enabled
Enable or Disable the Wake on LAN
7.5. Security
7.5.1. Security > Password Description
Feature Options Description
Setup Administrator Password Enter password
User Password Enter password
Secure Boot menu
►
Submenu Customizable Secure Boot settings.
7.5.1.1. Security > Password Description > Secure Boot Menu
Feature Options Description
System Mode Setup
Secure Boot Info only
Vendor Boot Info only
Secure Boot Control Disabled
Enabled
Secure Boot can be enabled if:
1. System is running in User mode with enrolled
Platform Key (PK)
2. CSM function is disabled.