ADLINK Technology PXI-3982 User Manual Download

Page: 77 / 77

Getting Service

PXI-3982

Getting Service

Ask an Expert:

http://askanexpert.adlinktech.com

ADLINK Technology, Inc.

9F, No.166 Jian Yi Road, Zhonghe District

New Taipei City 235, Taiwan

Tel: +886-2-8226-5877

Fax: +886-2-8226-5717

Email: [email protected]

Ampro ADLINK Technology, Inc.

5215 Hellyer Avenue, #110

San Jose, CA 95138, USA

Tel: +1-408-360-0200

Toll Free: +1-800-966-5200 (USA only)

Fax: +1-408-360-0222

Email: [email protected]

ADLINK Technology (China) Co., Ltd.

300 Fang Chun Rd., Zhangjiang Hi-Tech Park

Pudong New Area, Shanghai, 201203 China

Tel: +86-21-5132-8988

Fax: +86-21-5132-3588

Email: [email protected]

ADLINK Technology GmbH

Hans-Thoma-Strasse 11

D-68163 Mannheim, Germany

Tel: +49-621-43214-0

Fax: +49-621

43214-30

Email: [email protected]

Please visit the Contact page at

www.adlinktech.com

for informa-

tion on how to contact the ADLINK regional office nearest you.

Summary of Contents for PXI-3982














































































Search results

Summary of Contents for PXI-3982

Reviews:

Related manuals for PXI-3982

Brands by name

Popular brands

ADLINK Technology PXI-3982, User Manual

Search results

Summary of Contents for PXI-3982

Reviews:

Related manuals for PXI-3982

Brands by name

Popular brands