ADLINK Technology NuCOM cPCI-7841 User Manual Download Page 51 | Manualshive

Page: 51 / 52

background image

Warranty Policy

43

Warranty Policy

Thank you for choosing ADLINK. To understand your rights and
enjoy all the after-sales services we offer, please read the follow-
ing carefully.

1. Before using ADLINK’s products please read the user man-

ual and follow the instructions exactly. When sending in
damaged products for repair, please attach an RMA appli-
cation form which can be downloaded from: http://
rma.adlinktech.com/policy/.

2. All ADLINK products come with a limited two-year war-

ranty, one year for products bought in China:

X

The warranty period starts on the day the product is
shipped from ADLINK’s factory.

X

Peripherals and third-party products not manufactured
by ADLINK will be covered by the original manufactur-
ers' warranty.

X

For products containing storage devices (hard drives,
flash cards, etc.), please back up your data before send-
ing them for repair. ADLINK is not responsible for any
loss of data.

X

Please ensure the use of properly licensed software with
our systems. ADLINK does not condone the use of
pirated software and will not service systems using such
software. ADLINK will not be held legally responsible for
products shipped with unlicensed software installed by
the user.

X

For general repairs, please do not include peripheral
accessories. If peripherals need to be included, be cer-
tain to specify which items you sent on the RMA Request
& Confirmation Form. ADLINK is not responsible for
items not listed on the RMA Request & Confirmation
Form.

«
...
49
50
51
52
»

Summary of Contents for NuCOM cPCI-7841





















































Reviews:

No comments

Related manuals for NuCOM cPCI-7841

Brand: SIIG Pages: 8

Brand: Lanpro Pages: 5

Brand: Cidron Pages: 27

Brand: FastVDO Pages: 16

Brand: Broadcom Pages: 39

OBID i-scan ID ISC.MRU102-POE

Brand: Feig Electronic Pages: 21

Brand: DigiDesign Pages: 74

Brand: GE Pages: 33

Brand: GE Pages: 53

Brand: Lava Pages: 24

FX-DS540-MPCI4W

Brand: Contec Pages: 5

Brand: VIVOpay Pages: 19

Brand: SeaLevel Pages: 29

Brand: Sven Pages: 4

Brand: Cypress Pages: 16

Brand: Diablotek Pages: 1

Brand: Lava Computer Pages: 4

Multi-Slot Card Readers

Brand: Edge Pages: 1

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands