NEON-1040/1020 Starter Kit Quick
Start
Guide
Rev.
2.00
P/N 50-
40270-5000
August 8, 2014
Advance Technologies
Automate the World
Web:
http://www.adlinktech.com
Service:
Tel: +886-2-8226-5877
Fax: +886-2-8226-5717
Copyright 2014 ADLINK Technology, Inc.
Contents and specifications subject to change
without notice.
Contact ADLINK
Installing the 16mm C-mount lens
Connecting the USB Hub
1. Remove the protective cover from
the threaded barrel on the rear of
the lens
2. Insert the barrel into the threaded
inner sleeve on the front of the
NEON x86 Smart Camera
3. Carefully back-rotate the lens
counterclockwise until the threads
catch
4. Gently and smoothly rotate the lens
clockwise until it is firmly seated
5. Remove the lens cap before use
1. Connect the USB hub power cable
to the USB hub
2. Connect the USB hub connection cable
to the USB hub
3. Connect the USB hub connection cable
to the NEON x86 Smart Camera cable
USB socket
4. Connect the USB hub power cable to
a compatible power source
Installing the IP67-rated lens protector
NOTE: It is reccommended that the
protective cover remain on the thread-
ed outer sleeve until the lens protector
is installed
1. Remove the protective cover from
the threaded outer sleeve on the
front of the NEON x86 Smart
Camera
2. Carefully back-rotate the lens
protector counterclockwise onto
the sleeve until the threads catch
3. Gently and smoothly rotate the lens
protector clockwise until it is firmly
seated
